SmartMonTools: SMART Self-test log structure Status Completed: read failureLinux - Repairing bad blocks on a...
I changed a word from a source, how do I cite it correctly?
Is there a sentence that begins with “them”?
Sol Ⅲ = Earth: What is the origin of this planetary naming scheme?
Is BitLocker useful in the case of stolen laptop?
Why are some Mac apps not available on AppStore?
How can I fix a framing mistake so I can drywall?
Why should I always enable compiler warnings?
Are scroll bars dead in 2019?
Is there any detail about ambulances in Star Wars?
Might have gotten a coworker sick, should I address this?
Procedure for traffic not in sight
Wrathful Smite, and the term 'Creature'
Are there any instances of members of different Hogwarts houses coupling up and marrying each other?
Are programming languages necessary/useful for operations research practitioner?
What was the first LISP compiler?
Why is the the worst case for this function O(n^2)?
How would a village use its river that it shares with another village downstream?
How is the Team Scooby Doo funded?
Seized engine due to being run without oil
Starring Samurais - Several Scribbled Short Stories
Why was "leaping into the river" a valid trial outcome to prove one's innocence?
Are Democrats more likely to believe Astrology is a science?
Dividing Divisive Divisors
Should I use my toaster oven for slow roasting?
SmartMonTools: SMART Self-test log structure Status Completed: read failure
Linux - Repairing bad blocks on a RAID1 array with GPTmanufacturer's tool found bad blocks, but smartctl doesn't show anyUnderstanding smartctl output for a CF cardHard-drive errorsZFS - “Add. Sense: Unrecovered read error - auto reallocate failed” in syslog, but SMART data looks OKSMART health-test and statusSMART test completes with no failure after failing test previously, without reallocating any sectors?Read raw SMART data with smartmontools from CF cardmdadm RAID5 with bad sectors and bad blocks
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
0
I am running a self-test using smartctl -t
The output as shown in smartctl -a is the following.
Does this mean my disc is broken, or is there still hope? I am aiming to recover some data from one of the partitions that is not mounting. Fsck also fails to correct the error.
Please advise the next step so I can mount the affected partition. Thank you,
# smartctl -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-13-generic] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: WDE4S5YD
LU WWN Device Id: 5 000c50 0a855e37a
Firmware Version: ACM1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Sep 9 03:45:27 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 052 006 Pre-fail Always - 107767397
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 1672
7 Seek_Error_Rate 0x000f 082 060 045 Pre-fail Always - 4453874815
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5653 (9 83 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 691
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 28429
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 055 040 Old_age Always - 31 (Min/Max 20/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 92
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 98
193 Load_Cycle_Count 0x0032 042 042 000 Old_age Always - 116839
194 Temperature_Celsius 0x0022 031 045 000 Old_age Always - 31 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 096 095 000 Old_age Always - 368
198 Offline_Uncorrectable 0x0010 096 095 000 Old_age Offline - 368
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5460 (110 59 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10332521622
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 13791968337
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28431 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28431 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.516 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.505 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:14.479 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:14.477 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:14.465 SET FEATURES [Set transfer mode]
Error 28430 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.260 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
Error 28429 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.031 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.021 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.995 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.994 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.981 SET FEATURES [Set transfer mode]
Error 28428 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.761 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
Error 28427 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.521 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:13.511 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.484 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.483 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.470 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 5653 291803192
# 2 Short offline Completed: read failure 90% 5653 291803192
# 3 Extended offline Completed: read failure 90% 5652 291803192
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
hard-disk smartctl smart
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
add a comment |
0
I am running a self-test using smartctl -t
The output as shown in smartctl -a is the following.
Does this mean my disc is broken, or is there still hope? I am aiming to recover some data from one of the partitions that is not mounting. Fsck also fails to correct the error.
Please advise the next step so I can mount the affected partition. Thank you,
# smartctl -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-13-generic] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: WDE4S5YD
LU WWN Device Id: 5 000c50 0a855e37a
Firmware Version: ACM1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Sep 9 03:45:27 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 052 006 Pre-fail Always - 107767397
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 1672
7 Seek_Error_Rate 0x000f 082 060 045 Pre-fail Always - 4453874815
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5653 (9 83 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 691
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 28429
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 055 040 Old_age Always - 31 (Min/Max 20/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 92
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 98
193 Load_Cycle_Count 0x0032 042 042 000 Old_age Always - 116839
194 Temperature_Celsius 0x0022 031 045 000 Old_age Always - 31 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 096 095 000 Old_age Always - 368
198 Offline_Uncorrectable 0x0010 096 095 000 Old_age Offline - 368
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5460 (110 59 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10332521622
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 13791968337
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28431 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28431 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.516 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.505 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:14.479 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:14.477 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:14.465 SET FEATURES [Set transfer mode]
Error 28430 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.260 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
Error 28429 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.031 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.021 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.995 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.994 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.981 SET FEATURES [Set transfer mode]
Error 28428 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.761 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
Error 28427 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.521 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:13.511 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.484 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.483 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.470 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 5653 291803192
# 2 Short offline Completed: read failure 90% 5653 291803192
# 3 Extended offline Completed: read failure 90% 5652 291803192
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
hard-disk smartctl smart
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
add a comment |
0
0
0
I am running a self-test using smartctl -t
The output as shown in smartctl -a is the following.
Does this mean my disc is broken, or is there still hope? I am aiming to recover some data from one of the partitions that is not mounting. Fsck also fails to correct the error.
Please advise the next step so I can mount the affected partition. Thank you,
# smartctl -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-13-generic] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: WDE4S5YD
LU WWN Device Id: 5 000c50 0a855e37a
Firmware Version: ACM1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Sep 9 03:45:27 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 052 006 Pre-fail Always - 107767397
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 1672
7 Seek_Error_Rate 0x000f 082 060 045 Pre-fail Always - 4453874815
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5653 (9 83 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 691
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 28429
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 055 040 Old_age Always - 31 (Min/Max 20/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 92
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 98
193 Load_Cycle_Count 0x0032 042 042 000 Old_age Always - 116839
194 Temperature_Celsius 0x0022 031 045 000 Old_age Always - 31 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 096 095 000 Old_age Always - 368
198 Offline_Uncorrectable 0x0010 096 095 000 Old_age Offline - 368
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5460 (110 59 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10332521622
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 13791968337
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28431 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28431 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.516 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.505 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:14.479 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:14.477 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:14.465 SET FEATURES [Set transfer mode]
Error 28430 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.260 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
Error 28429 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.031 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.021 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.995 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.994 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.981 SET FEATURES [Set transfer mode]
Error 28428 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.761 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
Error 28427 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.521 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:13.511 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.484 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.483 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.470 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 5653 291803192
# 2 Short offline Completed: read failure 90% 5653 291803192
# 3 Extended offline Completed: read failure 90% 5652 291803192
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
hard-disk smartctl smart
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
I am running a self-test using smartctl -t
The output as shown in smartctl -a is the following.
Does this mean my disc is broken, or is there still hope? I am aiming to recover some data from one of the partitions that is not mounting. Fsck also fails to correct the error.
Please advise the next step so I can mount the affected partition. Thank you,
# smartctl -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-13-generic] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: WDE4S5YD
LU WWN Device Id: 5 000c50 0a855e37a
Firmware Version: ACM1
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Sep 9 03:45:27 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 052 006 Pre-fail Always - 107767397
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 1672
7 Seek_Error_Rate 0x000f 082 060 045 Pre-fail Always - 4453874815
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5653 (9 83 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 691
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 28429
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 055 040 Old_age Always - 31 (Min/Max 20/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 92
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 98
193 Load_Cycle_Count 0x0032 042 042 000 Old_age Always - 116839
194 Temperature_Celsius 0x0022 031 045 000 Old_age Always - 31 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 096 095 000 Old_age Always - 368
198 Offline_Uncorrectable 0x0010 096 095 000 Old_age Offline - 368
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5460 (110 59 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10332521622
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 13791968337
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28431 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28431 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.516 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.505 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:14.479 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:14.477 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:14.465 SET FEATURES [Set transfer mode]
Error 28430 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.260 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:14.259 READ FPDMA QUEUED
Error 28429 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:14.031 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:14.021 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.995 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.994 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.981 SET FEATURES [Set transfer mode]
Error 28428 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.761 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 3d+20:04:13.721 READ FPDMA QUEUED
Error 28427 occurred at disk power-on lifetime: 5444 hours (226 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 3d+20:04:13.521 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 3d+20:04:13.511 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 3d+20:04:13.484 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 3d+20:04:13.483 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 3d+20:04:13.470 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 5653 291803192
# 2 Short offline Completed: read failure 90% 5653 291803192
# 3 Extended offline Completed: read failure 90% 5652 291803192
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
hard-disk smartctl smart
hard-disk smartctl smart
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
asked 1 hour ago
Imme22009Imme22009
1114 bronze badges
1114 bronze badges
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/4.0/"u003ecc by-sa 4.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f539928%2fsmartmontools-smart-self-test-log-structure-status-completed-read-failure%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
draft saved
draft discarded
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f539928%2fsmartmontools-smart-self-test-log-structure-status-completed-read-failure%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
